Drivers

BCL Printer Series -

Windows Drivers

Windows Drivers Instructions:

  1. Plug a USB cable into the printer.
  2. Plug the other end of the USB cable into your computer.
  3. Double click on the driver to begin installation.
  4. Read and agree to the licensing agreement, and then click “Next”.
  5. The driver will automatically detect and set up your printer. After installation, click “Finish”. Your printer should now display in the “Devices and Printers” menu.

 

Mac Drivers

Mac Drivers Instructions:

  1. Plug a USB cable into the printer.
  2. Plug the other end of the USB cable into your computer.
  3. Double click the driver to begin installation and click “continue”.
  4. Select a destination to install the software and click “continue”.
  5. Choose your installation type, click “continue”, then click “install”.
  6. Type in your computer password, then click “Install Software”.
  7. After the installation indicates it was successful, click “close”. The printer will now display in the “Printers & Scanners” menu.

 

Zebra Drivers

  1. Plug a USB cable into the printer.
  2. Plug the other end of the USB cable into your computer.
  3. Double click on the Zebra installation package and choose “Install Zebra Printer”.
  4. Select “Zebra ZP500(ZPL)”.
  5. Choose the correct port (USB or Ethernet IP Address for BCL 110 only), click “Next”, then click “Finish”.
  6. After installation, click “Finish”. Your printer should now display in the “Devices and Printers” menu.

 

Seagull Drivers

For optimal use with BarTender software on Windows operating systems, the Seagull Windows driver is recommended.

The Seagull Windows Driver supports the following operating systems:

  • Windows Vista, Windows 7, Windows 8 and 8.1, and Windows 10.
  • Windows Server 2008, 2008 R2, 2012, 2012 R2, and 2016.
  • 32-bit and 64-bit (x64) editions.

Note: the screens used below may vary slightly depending on your printer model and operating system. Install drivers based on the steps provided below. Turning off your security software before installation is also recommended.

  1. Connect your printer to your computer and power it on.
  2. Double click the Seagull Windows Driver. Read and agree to the licensing agreement. Then click “Next”.
  3. Choose the installation directory, then click “Next”.
  4. After installation, click “Finish”. If the printer is connected to your PC, the driver will install automatically.
  5. If the driver did not install automatically, select “Install printer drivers”, then click “Next”.
  6. Select the printer model, then click “Next”.
  7. Enter a name for your printer, then click “Next”. After, click “Finish”, then “Close” once the driver is installed.
  8. Once installation is complete, click “Finish”. The icon will now be found in “Devices and Printers” from the “Start” menu.

Note: if you have previously installed the driver, the USB port will connect automatically when the printer is connected to your computer. For support with driver problems, please contact us.